Cleveland KDT-20-T Operations Instructions download pdf (Page 13)

PRESSURE RELIEF VALVE

TESTING PROCEDURE

The pressure relief valve (optional on kettles) must

be checked at least twice a year as part of the

normal maintenance performed.

1. Open steam valve and preheat kettle.

2. Stand to the side of the pressure relief valve

discharge tube and pull ring three or four

times to insure free movement. Hold valve

open for two seconds each time, insuring

there is rapid steam escape each time.

3. If valve appears to be sticking replace

pressure relief valve. If foreign material is

discharged, replace pressure relief valve and

eliminate the source of contamination.

STEAM TRAP

To remove line condensate that forms inside the

steam jacket, each kettle should be equipped with

a steam trap in the line of the kettle outlet to the

drain. A good steam trap at startup releases air

and wet steam into the drain line for a few

minutes, then holds the steam jacket. During

cooking, the trap periodically releases

accumulated condensate. If the kettle's cooking

performance becomes inadequate after long use,

replacement of the steam trap with a new one may

restore kettle operation to peak efficiency.

MARINE LOCK

Inspect lock at least twice yearly.

1. Check for excessive play or wear on pivot.

Adjust or replace as required.

2. Insure lock is catching over the centre of the

stop pin and not bent to one side or the other.

Adjust or replace as required.

WARRANTY

Our Company supports a worldwide network of

Maintenance and Repair Centers. Contact your

nearest Maintenance and Repair Centre for

replacement parts, service, or information

regarding the proper maintenance and repair of

your cooking equipment

In order to preserve the various agency safety

certification (UL, NSF, ASME/Ntl. Bd., etc.), only

factory-supplied replacement parts should be

used. The use of other than factory supplied

replacement parts will void warranty.

WARNING

Kettle will be hot. Use gloves for protection.

MAINTENANCE

ALL SERVICE MUST BE PERFORMED BY A

QUALIFIED SERVICE TECHNICIAN.

This kettle requires very little preventative maintenance other than daily cleaning.

The pressure relief valve must be tested twice a year.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18

Comments to this Manuals

No comments

Cleveland KDT-20-T Operations Instructions Page 13

Comments to this Manuals

Related products and manuals for Electric kettles Cleveland KDT-20-T