5 of 5
19) Reinstall any panels that were
removed to install the new boiler
inspection cover. If your steamer
had a rear cover panel installed on
the rear sheeting, this can either be
left off the unit once the new boiler
cover is installed or modified by
installing a clearance hole to clear
the bolt. See Figure 10.
20) The Steamer is now ready for operation.
Cut a 2” Diameter
Hole or Similar
Opening Centered
on the Plate
Figure 10 Modifying the Rear
Cover Panel
Figure 9 Rear Panel Modification
As an alternate, a
rectangular opening
can be cut out to
remove the four
louvers shown
11.125
11.875
Comments to this Manuals